|
|
Thermometry Calibration Bath Systems
-
Programmable microprocessor controller for simple time/temperature studies.
-
Alpha numerical control panel.
-
Selectable readout in degrees C or F to the nearest 0.1, 0.01, or 0.001.
-
Built-in RS-232 interface.
-
Built-in jack which accepts remote probe.
-
Adjustable high temperature/low liquid cut-off.
-
Redundant safety backup.
-
Duplex pump.
-
CSA-approved.
-
CE approved for international use.
-
Thirteen liter stainless-steel resevoir.
-
Visual and audible alarm indicators.
-
Threaded inlet and outlet fittings for external circulation.
-
Unique proportional refrigeration controller.
-
Supplied with NIST traceable standards.
-
Supplied with turntable rack which holds ten thermometers.
-
Supplied with easy-to-use software.
-
Available in 120V or 208/240V.
-
Range: Ambient +10 C to 300 C (570 F)
-
Uniformity: +/- 0.005 C
-
Eighteen inch bath for total immersion
-
Fluid level adaptor for positive reading of the total immersion thermometer
-
A ten place thermometer holder included
-
Highest level of temperature equilibrium available in a bath.
-
Stability of 0.001 and 0.005 throughout entire range.
-
Heaters and cooling coils are built into the outside surface of the tank, creating a single large, uniform heat port.
-
Stability:
-
25 C +/- 0.001
- 100 C +/- 0.002
- 200 C +/- 0.003
- 300 C +/- 0.010
- Wetted parts: 304 stainless steel
- Optional RS-232 computer interface is available.
- IEEE-488 is also available.
|
